About This Product - Everbilt 1/4 HP Aluminum Submersible Sump Pump Tether Switch

The Everbilt 1/4 HP submersible sump pump is built with an aluminum motor housing for efficient motor cooling. The pump is available with a tethered float switch requiring an 18 in. minimum diameter wide sump basin. The motor is built with thermal overload protection. The pump comes with a 1-year limited warranty.

Highlights

• Aluminum motor housing for efficient motor cooling
• Continuous duty, efficient 115-Volt PSC motor for lower carbon footprint, higher efficiency using less energy to operate
• 8.25 ft. cord length
• Submersible for quiet operation
• 1-1/2 in. FNPT discharge
• Semi-open thermoplastic impeller passes 3/8 in. solids
• Pumps up to 37 GPM at 10 ft., outperforms the competition
• Shop All Everbilt Sump Pumps Here
• Click here for more information on Electronic Recycling Programs

Specifications

Amperage (A): 4.5 A

Cord Length (ft.): 8.25

Discharge Flow @ 0 ft. (gallons/hour): 3000

Discharge Flow @ 0 ft. (gallons/min): 50

Discharge Flow @ 10 ft. (gallons/hour): 2220

Discharge Flow @ 10 ft. (gallons/min): 37

Discharge Flow @ 15 ft. (gallons/min): 27

Features: Bottom/End Suction,Non-Clogging,Self-Priming,Thermal Overload Protection

Housing Material: Aluminum

Impeller Material: Plastic

Maximum Horsepower (hp): 1/4

Maximum Pressure (PSI): 8.66

Maximum Working Temperature (F): 100

Minimum Sump Basin Diameter: 18 or More

Minimum working temperature (F): 35

Outlet Diameter Connection (in.): 1-1/2 FPT

Pack Size: 1

Power Type Required: AC

Product Weight (lb.): 8.49 lb

Pump Switch Type: Tethered

Returnable: 90-Day

Vertical Lift (ft.): 20

Voltage: 115v

Certifications and Listings: CSA Certified

Manufacturer Warranty: 1 year

Product Depth (in.): 6.3 in

Product Height (in.): 10.63 in

Product Width (in.): 8.27 in

Switch-Off Height (in.): 7

Switch-On Height (in.): 15.25

Product Information

Internet # 315023087

Model # HDSP25W